Operation Manual

7
GB: Control Omni Y Connector
Description
Control Omni Y-connector (429050) is to be used when you want to connect 2 control
switches or connect 1 control switch and at the same time a device that needs a relay
closing for instance a radio transmitter.
Technical data
Relay output, max current /voltage
120 mA, 24V AC/DC
Plug relay output
2-pole, 3,5 mm
Input for switches
2-pole, 3,5 mm
Plug for connecting to Control Omni
4-pole, 3,5 mm
Input 1 and 2 for
control switches
If no relay output is
needed the cable
may be cut off here
Relay output, to connect
e.g. an external radio
transmitter
Is to be connected to
the input for control
switches on Control
Omni