Operation Manual

9
GB: English Manual Gewa IR-1S Micro
Introduction
The Gewa IR-1S Micro is a single channel IR transmitter with internal setting to one of
seven different channels.
The Gewa IR-1S Micro is a part of the “GewaLink-system” and therefore can be used
together with all of these products.
General information about Gewa IR-1S Micro
On delivery the GewaLink channel 16 is factory programmed, this means that it is possible
to use the transmitter as soon as a battery has been inserted.
This picture shows the various terms and functions which are described in the text.
Inserting Batteries
Unscrew the screws holding the bottom of the IR-1S Micro using a Phillips screwdriver.
Remove the bottom and insert three 1.5V silver oxide batteries type SR44, or 401930
Battery pack for Micro and Wrist transmitters, available from Abilia or Abilia dealer. Insert
the batteries according to the guidelines at the bottom of the battery compartment. Pay
attention to the polarity! It is important to use specified batteries for maximum transmission
range.
There will be a battery warning when 75% of the battery power has been used. The
indicator lamp will then flash with an interval of one second. The transmitter has enough
power to transmit for a while longer.
Fig 2
GEWA AB
Batteries: 3 x SR44
or 401930 Battery pack for Micro and Wrist transmitters
Fig 1
Function button
Indicator light