Datasheet

Product
KEBS 0560
KEBS-0560 is a crimping tool for endsleeves
according to DIN 46228, 0.5 - 6 mm², front
feeded, Trapez- Crimp.
High strength, through hardened alloy steel
construction
Unique mechanism significantly reduces
hand force requirement over competing
crimping tools
Versatile and easy to customize for right
hand or left hand users.
Non- slip pad holds tool in place when
leveraging on a work surface
Full cycle crimp mechanism to ensure
consistent, reliable crimp
Ratchet release mechanism to clear
miscrimps and obstructions
Precision eccentric adjustment for
consistent performance and ability to calibrate
Hole in handle allows attachment of safety
strap
Each tool has a unique serial number for
traceability
Die profile Crimp profile
TECHNICAL DATA
Length: 220 mm/8.66"
Width: 22.5 mm/0.87"
Height: 72 mm/2.83"
Weight: 430 gr/0.95 lb
Wire size: 0.5-6 mm
2
/ AWG 22-
AWG 10
Crimp dimensions mm/ mm
2
:
0,5 - 6
Crimp dimensions inch/ AWG:
22 - 10
Life span, cycles: 50,000
Pressmaster AB
P.O. Box 3, Industrivägen
SE-796 21 Älvdalen, Sweden
Tel: [phone]
E- mail: [e-mail]
www.pressmaster.com