Datasheet

Original Line

DCC-1113

Die profile

Crimp profile

The DCC-1113 is a precision, ratchet crimp tool designed to provide consistent and

reliable crimp connections on BNC, TNC coaxial connectors RG58, RG59, RG62,

RG71, Thinnet.

Easy to use

Open the tool. Insert terminal in correct nest. Close tool until terminal fastened. Insert

wire into terminal. Close tool until ratchet release. Attention: To release ratchet

mechanism, push the trigger.

Calibration

To calibrate this tool the pre-load has to be measured. Gauge is required to ensure

that the die is according to specification. For more information; See instruction sheet.

Technical data

Prod.code: DCC-1113

Lenght: 198 mm / 7,80"

Height: 65 mm / 2,56"

Weight: 350 gr / 0,77 lbs

Connector: Coaxial

Description: RG58, RG59, RG62,

RG71, Thinnet

Hex Crimp dim: .255 / .213 / .067"

Symmetric dies for right and left

handed operation

Ergonomic handles for low effort

crimping

Ratchet action to ensure full crimp

cycle with safety release

Durable - minimum of 50,000 cycles.

Tool is factory set with a precise

eccentric cam adjustment function to

guarantee performance

Distributors address info

PAGE 1
Original Line DCC-1113 Die profile Crimp profile The DCC-1113 is a precision, ratchet crimp tool designed to provide consistent and reliable crimp connections on BNC, TNC coaxial connectors RG58, RG59, RG62, RG71, Thinnet. Easy to use Open the tool. Insert terminal in correct nest. Close tool until terminal fastened. Insert wire into terminal. Close tool until ratchet release. Attention: To release ratchet mechanism, push the trigger. Calibration To calibrate this tool the pre-load has to be measured.