Datasheet

Original line
CEB-4010
Die profile
Crimp profile
The CEB-4010 is a precision, ratchet crimp tool designed to provide consistent and
reliable crimp connections on endsplices/ferrules terminals on wires ranging from .
Easy to use
Open the tool. Insert terminal in correct nest. Close tool until terminal fastened. Insert
wire into terminal. Close tool until ratchet release. Attention: To release ratchet
mechanism, push the trigger.
Calibration
To calibrate this tool the pre-load has to be measured. Gauge is required to ensure
that the die is according to specification. For more information; See instruction sheet.
Technical data
Prod.code: CEB-4010
Lenght: 225 mm / 8,86"
Height: 70 mm / 2,76"
Weight: 540 gr / 1,19 lbs
Connector: Endsplices / Ferrules
Description: Insulated and Uninsulated
Wire size: 12-8 AWG
Professional crimptool for optimized
crimp perfomance.
Ergonomic handles for low effort
crimping.
Ratchet action to ensure full crimp
cycle with safety release.
Durable - minimum of 50,000 cycles.
Tool is factory set with a precise
eccentric cam adjustment function to
guarantee performance.
Distributors address info