IQ E-Tablet User Manual (Adapted for E001, E002, E003) Copyright(C) 2003-2007 A Brighter Image Pty Ltd. Website: www.iqboard.com.au or www.abimage.com.au Tel: 02.9938 6866 Fax: 02.9938 6899 E-mail: info@www.iqboard.com.
Important Statements: 1. Use this product strictly according to the detailed operation instruction in this User Manual to ensure proper use. Please read the instruction thoroughly to save installation time. 2. If this product is defective, please return it to the appointed agent or our company, together with your original sales receipt or invoice for replacement. 3. A Brighter Image Pty Ltd.
Copyright Your purchasing of this product does not mean A Brighter Image Pty Ltd or Returnstar Electronic Information Co., Ltd. has transferred the Intellectual Property Right. The product (includes but not limited to any trademarks, images, photos, flash, video, recording music, writing and additional procedure, and other relative product), enclosed printing material, and any copies made under authorisation of A Brighter Image Pty Ltd. are products of A Brighter Image Pty Ltd.
Chapter 1 Product Introduction: The IQ E-Tablet is a portable mini electronic whiteboard distributed by A Brighter Image Pty Ltd with exclusive patent technology. The system is mainly composed of receiver, digital pen and wireless adapter (special for wireless type).
Chapter 2 Function Features: 2.1. Integrates various powerful functions such as screen touch and write, electronic notes (record), document draft, table make & fill, drawing design, instant text-image communication, electronic teaching and demonstration; can completely replace a PC touch screen, writing screen, electronic whiteboard, electronic drawing board, writing board, mouse and so on, achieving the perfect combination of traditional teaching techniques with computer usage. 2.1.
2.1.5 Direct Drawing and Instant Text-image communication: Also supports any special effect tools attached in software. E.g., you can use drawing software like PHOTOSHOP and Paint for direct drawing; you also can directly write in some messengers (MSN, ICQ, QQ) and e-mail; and send a hand written or typed message and e-mail. 2.1.
2.2.6 Two of the IQ E-Tablet models can be used offline. Without connecting to a computer, it can save text and drawings written on normal paper into the receiver, with storage capacity of more than 100 pages. The writing content also can be saved in different documents and pages. This product is especially useful for students, businessmen, and reporters, who have trouble in carrying a computer but also need digital file for saving. 2.3.
Chapter 3 Specification and Parameter 3.1 Product Specification Model 1-E001 1-E002 1-E003 Type Standard Storage Wireless PC connection USB USB Wireless Bluetooth/ USB Storage Capacity None 100 pages (A4 size) 100 pages (A4 size) 3.
3.5 System Requirement: CPU: Based on X86 CPU pentium166 or above Memory: 64 MB RAM (recommend 128 MB RAM) Hard Disk: 30 MB free space USB Port: at least one available USB port Projector: any brand, model or resolution Projection media: Paper material or other material, flat screen (LCD or laptop). 3.6 Storage and Operating Specifications: Storage: Temperature:-40 degrees to 60 degrees Humidity: 0% to 95% Operation: Temperature: 0 degree to 40 degrees Humidity: 15% to 85%.
Chapter 4 Hardware installation and instruction 4.1 Specifications of and instructions for each part 4.1.1 Signal receiver (Pen box) Function 1. When connecting with computer, the signal receiver can receive the signal emitted by digital pen, to enable the control of the computer, and achieve handwriting functionality. Note: IQ E-Tablet Standard and Storage type can connect to computer by USB cable, and IQ Instruction for each part. E-Tablet Wireless type can connect 1.
Weight 17g When writing on an LCD screen, use the plastic Length 128mm stylus in the pen. The ball pen refill can be used for Diameter 12mm Electronic Noting. Effective Supports 17 inch screen for Screen Note: Refer to “4.2.2 Replace pen core” for the writing Writing, support just under A3 size details of replacing the pen core. area paper for Electronic Noting. 3. Signal emitter: press the pen tip, it will emit Note: Power source IQ E-Tablet can be signal.
4.1.5 Screen companion Function Fix the signal receiver on the computer screen. 1. Screen clamp (small): Fix the signal receiver on the top centre, left centre, or right centre of the computer screen. Note: this clamp suits a computer screen with narrow frame. 2. Screen clamp (big): Fix the signal receiver on the computer screen. Note: this clamp suits a computer screen with wide frame. 3. Connector: Connect the screen clamp and signal receiver. 4.2 Installation and use of the digital pen 4.2.
4.2.2 Replace pen core: You can select ball pen refill or plastic pen stylus according to different writing material (e.g. paper, table, glass, computer screen). Use the accessorial clip to pull the pen core out, the replace with a new one and press it down. As follows: Caution: 1. Digital pen has power saving function, in some circumstance, it will automatically enter the dormancy status. In dormancy status, all the function of digital pen will be temporarily disabled.
The power source of receiver is normal. Slowly flash (3 seconds) Charging the receiver battery. Normally on Successfully saved page when used offline. Green light and red light both flash 3 times. Receiving the signal normally On The storage capacity is fully occupied when Normally on recording. 4.3.2 Charge the signal receiver Connect the signal receiver to computer through USB cable and it will automatically charge. The charging time is about 3 hours.
Chapter 5 Install and uninstall driver and orientation programs 5.1 Install: When you first use IQ E-Tablet, you must install the driver and orientation program. Put the enclosed small CD in your CD-ROM, double click “Setup.exe” in the CD and install according to the prompt. Prompt: For your convenient usage, the system defaults to run IQ E-Tablet when system starts. After starting IQ E-Tablet, you also can click the taskbar icon, and select “Startup Setting” to enable or disable the autorun function. 5.
Chapter 6 Operations Caution: Please using Returnstar Whiteboard Software V4.1 as the access software for IQ E-Tablet. 6.1 Screen Writing 6.1.1 Starting IQ E-Tablet After installing the driver and orientation program, the IQ E-Tablet will automatically start every time you start your computer. Otherwise, you can select Start > Programs > Returnstar Notes Genius > Start, to start the Notes Genius.
Read file from receiver: Read Electronic Noting file saved in receiver. Clear all files in receiver: Clear all Electronic Noting files saved in receiver. Prompt: Refer to “6.2.2 Electronic Noting” for detailed operation steps. About: Click “About” to popup the information window of IQ E-Tablet, as follows Exit: Click “Exit” to quit IQ E-Tablet 6.1.2 Install signal receiver Normally we use the Screen Companion (screen clamp of signal receiver) to fix the receiver on the computer screen.
Step 2. Insert the pin of the connector into the screen clamp (big). The side with double sided tape on the screen clamp should be downward, as follows: Step 3. Tear out the protection layer of the double sided tape, then stick the screen clamp on the center of the screen upper frame, as follows: Installation of the screen clamp (small) Step 1.
Step 2. turn over the signal receiver to the receiving face, and turn up the pin, make it vertical to the signal receiver, as follows: Step 3. Insert the pin of the connector into the screen clamp (small), then the signal receiver and the connector will be joined, as follows: Step 4. Tear out the protection layer of the double sided tape, then stick the screen clamp on the centre of the screen upper frame, left frame, or right frame, as follows. Caution: 1.
6.1.3 Connecting the signal receiver to the computer There are two ways for connecting the signal receiver (pen box) with the computer First: use USB cable to connect. Connect one side of the USB cable to the USB port of the computer, the other side to the USB port of signal receiver, then the red indicator of receiver will light up or flash.
6.1.4 Screen Orientation (Calibration): When you fix the signal receiver on the computer screen and intend to write on the screen, you need to orient the IQ E-Tablet in order to make it work accurately. Once oriented, the moving track of digital pen will match the cursor, and you don’t need to re-orient using the same environment.
Caution: 1. When orienting, after you click one orientation point on the screen, if the next point does not appear, or the system does not respond, you can click “Cancel” button on the orientation interface to exit, and start the orientation program again to re-orient. 2. If you use CRT or LCD display, you can place a glass screen or a screen filter in front of the computer screen, then you can start Screen Writing. After you finish the orientation, you can use the digital pen for Screen Writing. 6.
Caution: 1. If you want to switch IQ E-Tablet Wireless type to Electronic Noting mode, you must first use digital pen to click B Zone, and release after half a second. If the greed indicator flashes six times rapidly, it means the receiver has been switched into Electronic Noting mode. If you haven’t clicked the B Zone, the receiver will be under “Wireless connecting” status instead of “Electronic Noting” mode. 2. You don’t need to orient for Electronic Noting, just directly write on the paper.
Caution: 1. For IQ E-Tablet Wireless type, please unplug the wireless adapter before reading the file saved in the receiver. 2. When you want to read files from the receiver, please start Returnstar Whiteboard Software first, or the system will prompt an error message. When you open a file, if you haven’t saved the current page, the software will prompt you to save it (as follows). Click “Yes” to save the file, click “No” to discard the file, click “Cancel” to quit the current opening operation. 6.2.
Chapter 7: Warnings 1. Avoid water, dust, shock, bending, and strong light. 2. Fix the signal receiver in a certain position, and do not move during the writing process to ensure accuracy when the computer is displaying your handwriting. 3. The digital pen should be kept in the receiver when not in use. 4. During the writing process, there should be no obstacle between the digital pen and signal receiver. 5. Promptly replace the button cell and pen core when they run out. 6.
Chapter 8 FAQs Behavior Reason Solution 1. The computer does not display the writing (the green indicator is not lighting) The writing is not within the effective writing area. Write within the effective writing area (A4 size paper or 17 inch screen). The battery voltage is too low. Replace the battery. The system hardware & software is not properly connected. Connect correctly according to this user manual. The relevant installed. Install the application. 2.
dithering The optical mouse is so close to the digital pen that it affects the operation. Move the optical mouse away from the screen a little bit, or use non-optical mouse. The battery voltage is too low or the battery is not well installed. Replace the battery or re-install the battery. 5. The green indicator and red indicator do not flash alternately when writing. The battery voltage is too low or the battery is not well installed. Replace the battery or re-install the battery. 6.
