User's Guide

Industrial Tracker User Guide FW 1.6 V1.1
Page 7 of 13
11 July 2018
Restricted distribution
6 Remote configuration using ADA
All following parameters are configurable in Abeeway Data Analyzer (ADA) application
6.1 Operating Mode Configuration
All modes can be set using ADA application:
➢ Standby
➢ Motion tracking
➢ Permanent tracking
➢ Motion start/end tracking
➢ Activity tracking
6.2 Position on demand
Position of the tracker can be requested
6.3 Parameters configuration
Following parameters are configurable:
➢ Parameters used in operating modes:
✓ LoRa Heartbeat: period of Lora Heartbeat messages
✓ Position report: period of LoRa position messages
✓ Geolocation methodology (geoloc sensor)
➢ Parameters used in side operating modes:
✓ Periodic position: activation, and period of LoRa position messages
✓ Geolocation methodology (geoloc method)
7 Downlink messages
These messages are sent from the server to the tracker through the LoRa network. They are used to
configure the tracker or request a position. Each message contains a header including:
➢ A message type
➢ An acknowledgement token
The remaining of the message depends on the message type. The tracker accepts three types of downlink
messages, listed in the following table:
Message type
ID
Description
POD
0x01
Position on demand
Set Mode
0x02
Change the tracker mode
Set Param
0x0B
Modify a parameter