User's Guide

Industrial Tracker User Guide FW 1.6 V1.1
Page 12 of 13
11 July 2018
Restricted distribution
8.4 Position accuracy
GPS
(3)
Position Accuracy (50%-90%)
10 to 18 meters
Time to have a position
Cold start
50-210 seconds
Hot start
15 seconds
Acquisition sensitivity
-140 dBm
Low power
GPS
(3)
Position Accuracy (50%-90%)
15 - 30 meters
Time to have a position
10-30 seconds
Acquisition sensitivity
-160 dBm
Wi-Fi
Indoor Position accuracy
20-50 meters
Time to have a position
3 seconds
Sensitivity
-86 dBm
(3) In static, >5 satellites at -130 dBm
8.5 Power management
Non-rechargeable Battery
3.6V
19 Ah
Battery type
Lithium Thionyl Chloride Type D
Power consumption
Stand-by: 0,01mA/h
GPS tracking in cold start
(1)
: 1,5mAh (per position)
Low power GPS tracking
(1)
: 0,3mAh (per position)
WiFi tracking: 0,1mAh (per position)
(1) In static, 6 satellites or more at -130 dBm
9 Instructions / Warnings
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Any changes or modifications to this equipment not expressly approved by ABEEWAY may
cause, harmful interference and void the FCC authorization to operate this equipment.
This equipment complies with FCC’s radiation exposure limits set forth for an uncontrolled
environment under the following conditions :
1. This equipment should be installed and operated such that a minimum separation
distance of 20cm is maintained between the radiator (antenna) and user’s/nearby
person’s body at all times.
2. This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.