User manual

4.2. Activating window closer

To activate the window closer you move the window into tilt

position. This happens by simultaneously pulling on the window

handle and the release cord (A3) in direction of your body (fig.

34).

4.3. Closing the window by the closing button

By operating the „closing button“ (A5) at the window closer

the window is immediately automatically closed.

Fig. 34: Activating the

window closer / Moving

the window into tilt position

Fig. 35: Operating

the closing button (A5)

WIN-CONTROL WS 20.1

Fig. 37: Opening the window

completely

Fig. 36: Removing the clip (A1)

4.4. Opening the window completely

To open the window completely, for example to clean it or to

ventilate extensively, close the window, pull the clip (A1) from

right to left from the window frame bracket (fig. 36) and after

open the window completely (fig. 37).

To reactivate the window closer, push the clip, when the win-

dow is closed, onto the window frame bracket.