User Manual

7
www.TheABDO.com
ADJUSTING BARREL PIN FOR CONDITION 1 (Round in
Chamber)
DO NOT do this modification without proper training and licensing if
required on carr
ying a firearm in condition 1, as you risk injury or death of you or
someone else. Begin by shortening the barrel pin to 1.75” (1 ¾”) overall by
cutting the pin with a hacksaw. The length of the pin is measured from the base
where the screw connects the pin to your ABDO® device. Deburr and round cut
the end of the barrel pin with sand paper or file. Make sure your firearm rests on
the barrel end, NOT on pin with round in chamber. See images below:
WARNING
Children are attracted to and can operate firearms that can cause severe
injuries or death. Prevent child access by always keeping guns locked away
and unloaded when not in use. If you keep a loaded firearm where a child
obtains and improperly uses it, you may be fined or sent to prison.
ADVERTENCIA
A los ninos los atroen las armaside de fuego y los pueden hacer funcionar.
Ellos pueden causarses lesiones graves y la muerte. Evite que los ninos
tengon acceso a los armas de fuego guardandolas siempre con llave y
descargadas cuando no las este utilizando. Si usted tiene un arma de fuego
cargado en un lugar en que un nono tiene acceso a ella y la usa
indebidamente. Le pueden dar
una multa a enviarlo a la carcel.