3.0

ABBYY® PDF Transformer 3.0 User’s Guide
● Add border
Select this option if you wish your stamp to be enclosed in a frame.
4. You can save the stamp as a template.
Click Save Stamp Template…, provide a name for the template, and click Save.
5. Click OK.
You can add a stamp based on a previously saved template:
1. Click on the arrow next to the tool and select the desired stamp template.
2. Place the stamp anywhere you like on the page.
Moving a stamp
● Use the tool to select the stamp and then drag the stamp with your mouse.
Changing the size of a stamp
1. Click on the stamp to make it active.
2. Position the mouse cursor on a border of the stamp.
3. Holding down the left mouse button, drag the border in the desired direction
4. Release the mouse button.
If you position the mouse cursor in the corner of a stamp area, dragging the mouse will change both vertical and horizontal
borders simultaneously.
Changing stamp parameters
● Doubleclick on the stamp and specify the desired parameters.
● Select the stamp whose parameters you wish to change, select Stamp Properties from the shortcut menu, and specify the desired
parameters.
Deleting a stamp
● Select the stamp you wish to delete and then press DEL.
● Select the stamp you wish to delete and then select Delete Stamp from the shortcut menu
Creating a stamp template
There are several methods available to create a stamp template:
1. Doubleclick on a stamp.
2. Select Save Stamp Template…
3. Provide a name for the template and click Save.
1. Click on the arrow next to the tool and then click Create New Stamp Template.
2. Specify the desired stamp parameters and click OK.
13