6.5

© 2007 ABBYY. All rights reserved.
24
Operator permissions
You must specify batch type processing permissions for each operator. If an operator has no permissions for processing a batch type,
the batches associated with this type will not be sent to this operator.
Use the Operator dialog box, to specify and edit operator permissions. To open this dialog box, select Operators in the project tree,
select the required operator, and then select Action>Properties...
Workstations
The operator of the Administration Station can view the list of the workstations (computers) on which the form capture system
stations are installed as well as the settings of the stations.
To view the list of the computers, select the Stations objects in the project tree.
To view the settings of a workstation:
1. From the project tree, select Stations.
2. From the workstations list, select the desired workstation.
3. From the
Action menu, select Settings...
4. In the
Workstation dialog box that appears, view and/or specify the required settings.
License
The operator of the Administration Station can view information about the ABBYY FormReader Enterprise Edition license:
• The license parameters and their current status,
• The workstations which are working at the moment.
To view the information about your license, select Tools>License... The license parameters will be displayed in the License dialog
box that appears.
Working with problem batches
If by some reason the processing of a batch cannot be completed (for example, the operator cannot determine why the batch has not
been assembled or there are some rule errors that he cannot correct, etc.), the operator of the Correction Station can mark the batch
as a "problem batch". Such batches are routed to the Problem Batches queue.
Use the Problem Batches dialog box to view problem batches on the Administration Station. In this dialog box, you can view batch
comments, open a problem batch and edit it. The administrator can perform any operations with problem batches that are allowed by
ABBYY FormReader with the exception of export.
To open the Problem Batches dialog box:
1. Select the Project object in the project tree;
2. In the
Action menu, select Problem Batches...