User Guide
the language list on the Standard toolbar. The Recognition Language dia
log will open. Select the desired language.
3. The language was disabled during custom installation.
Note: Always use the folder that contains ABBYY FineReader.
To show/hide a language in the drop–down list on the toolbar:
● Select the language of your choice in the Language Editor dialog
(Tools>Language Editor) and then check or uncheck the Show this lan
guage in the drop–down list on the toolbar item.
Tip: You may specify recognition language down to the block level. To do this, rightclick the
desired block and select Properties in the local menu. The Properties dialog will
open. Select the Block tab in the dialog and then select the block recognition language
in the Languages field on the tab.
Source Text Print Type
Usually, source text print type is determined automatically. To ensure this is the case, select
Autodetect in the Print Type group (Tools>Options menu, Recognition tab).
Select an alternate print type to increase recognition quality of dot matrix printouts done in
draft mode or typewritten texts:
● Select the Typewriter item if you wish to recognize typewritten texts
● Select the Dot Matrix Printer item if you wish to recognize dot matrix
printouts.
An example of draft mode dot matrix text. Character lines
are made up of individual dots.
An example of typewritten text. All letters are of equal
width (compare, for example, “w” and “a”).
To change print type:
● Select the print type of your choice on the Recognition tab in the Options
dialog (Tools>Options menu).
Note: Once you have completed recognition of typewritten texts or dot matrix printouts, re
enable the Autodetect item to recognize normal texts again.
54
ABBYY FineReader 7.0 User’s Guide