User Guide
Adding Bussiness Card Images to a Batch
The most efficient way of inputting business cards is to fit as many cards as possible onto the
scanner plate. After input, though, each card should be recognized as a separate page (particu
larly if deskewing has been done). You may choose either automatic or manual splitting tools
to separate the business card image into individual cards.
Note: This process requires that the cards be arranged in a specific order. Consult the “Working
with Business Cards” section in the ABBYY FineReader Tutorial for more information.
To split the image:
1. Select the image in the Batch window.
2. Select the Split Image from the Image menu to open the Split Image
dialog.
3. Click the Split business cards.
Note:
1. This process removes the split page from the batch and replaces it with indi
vidual card images. For more detailed information, see “General Information
on Working with Batches” section.
2. If the image has been split incorrectly, try to split the image manually by using
the Add vertical separator/Add horizontal separator button.
3. In order to delete all separators, click the Remove all separators button.
4. To move a separator, switch to Select separator mode (click the
button).
5. To delete a separator, switch to Select separator mode (click the but
ton) and move the separator outside of the image.
Page Numbering
A number is assigned to each scanned page. The default number is the number of the last
batch page plus one.
You may set page numbers manually if you want to retain the original page numbers in the
document or if you want to scan pages according to page number. To specify page numbers:
● Select the Ask for page number before adding page to the batch item
on the Scan/Open Image tab (Tools>Options menu).
To scan a large number of double–sided pages according to page number:
1. Select the Ask for page number before adding page to the batch item
on the Scan/Open Image tab (Tools>Options).
37
Chapter 4. Acquiring the Image