Use Manual

NOTE: The sample is allowed to reenter the system only on
the Input/Output Module.
Recover Recovers the status of the sample from the module if the
status is unknown.
Update Refreshes the sample data.
Close Closes the screen.
Related information...
Samples tab (TSM), page 118
Expert search tab (Samples) element descriptions (TSM), page 126
Sample History screen element descriptions (TSM)
The Sample History screen displays the detailed route of a sample along the track.
Elements
Target area options Displays all target areas of the sample.
Start Displays the start day, month, and time when the sample
will reach a specific target area or when the sample will be
processed by a specific module.
Location Displays the starting location of the sample when the sample
approaches a specific target area and when the sample
reaches the target area:
• A CAR with a module ID
• A CAR at a switch with a node ID
• A module ID and an area
Target / Activity Displays the target area that was selected from the area
options, or the activity that was selected on the CAR or the
module. The following information may be displayed:
Complete Output This target area is sent by the Track
Workflow Manager.
CAR removed / in jam The CAR is detected as removed or as
stuck in a traffic jam.
Section 5
Operating instructions
Track Sample Manager user interface
GLP systems Track Operations Manual
80003968-101 DRAFT - 2022-03-11
123
DRAFT 2022-03-11