Use Manual

5.
Tap Save.
The tests are now disabled.
Related information...
Test status screen (TWM), page 155
Enable the tests by instrument on the Test status screen (TWM)
Perform this procedure to enable the tests by instrument on the Test status screen of the Track
Workflow Manager (TWM). Individual tests of an analyzer or module can be enabled so that they
can be used as route targets.
1.
On the TWM main menu, tap Run.
2.
On the menu overview, tap Test status.
3.
On the Test status overview, tap By instrument to display the Test status screen by
instrument.
4.
On the instrument view of the Test status screen, tap the white check box in the TWM
status column and in the rows of the tests to be enabled.
5.
Tap Save.
The tests are now enabled.
Related information...
Test status screen (TWM), page 155
Disable the tests by type of analysis on the Test status screen (TWM)
Perform this procedure to disable the tests by type of analysis on the Test status screen of the
Track Workflow Manager (TWM). Individual tests of an analyzer or module can be disabled so
that they cannot be used as route targets.
1.
On the TWM main menu, tap Run.
2.
On the menu overview, tap Test status.
3.
On the Test status overview, tap By type of analysis to display the Test status screen by
type of analysis.
4.
On the analysis view of the Test status screen, tap the type of analysis in the Type of
analysis drop-down list.
NOTE: When the type of analysis is selected, all analyses of the corresponding type and
their associated instruments are displayed. To search for individual analyses, use the Filter
text box if they have been assigned a type of analysis.
5.
Tap to clear the blue check box in the TWM status column and in the row of the tests to be
disabled.
6.
Tap Save.
The tests are now disabled.
Operating instructions
Track Workflow Manager user interface
Section 5
158
GLP systems Track Operations Manual
80003968-101 - 2021-09-16