Use Manual

2.
On the menu overview, tap Sample search.
3.
In the Sample search menu, enter the sample ID (bar code) number in the Sample ID text
box.
NOTE: The sample bar code can be entered in the following ways:
– The bar code 999.999-9 can be entered as 099909999 if the last digit of the bar code
is known.
– The bar code 999.999 can be entered as 09990999* if the last digit of the bar code is
unknown or if all samples of the patient bar code that was entered are displayed.
4. Enter one or more of the following search criteria for the sample:
–
Order ID
–
Track entry time from
–
Track entry time to
–
Order time from
–
Order time to
–
Sample priority
–
Sender
–
Patient
–
Current area
–
Sample status filter:
•
Any
•
On-track samples without order
•
On-track samples with pending tests
•
On-track samples buffered by TSM
•
Ordered samples without any on-track sample
NOTE: If the Any option is selected for the sample status filter, the sample ID must be
entered as well. If one of the other options is selected for the sample status filter, TWM
ignores all additional search criteria (for example, sample ID) and searches for samples
based on the selected option.
5.
Tap Search.
6. In the list of samples found, tap a sample.
7. On the Sample details menu, view the following information:
– Order ID
– Sample ID
– Aliquot number
– Order date
Section 5
Operating instructions
Track Workflow Manager user interface
GLP systems Track Operations Manual
80003968-101 - 2021-09-16
147