Use Manual

Elements
Number Displays the number.
Barcode Displays the sample bar code number.
Date of entry Displays the entry date.
Status Displays the status.
Location Displays the current location.
Target area Displays the target area.
User Displays the operator.
Count Displays the count number.
Related information...
Samples tab (TSM), page 121
Request to send a sample to an output area (TSM)
Perform this procedure to request to send a sample to an output area on the Track Sample
Manager (TSM).
1.
On the TSM main menu, tap Samples.
2.
On the Samples tab, tap the Search tab.
3.
On the Search tab, enter the TSM sample number or the sample bar code.
NOTE: The sample bar code can be entered in the following ways:
– The bar code 0999.0999-9 can be entered as 0999.09999 if the exact bar code is
known.
– The bar code 0999.0999-9 can be entered as 0999.0999* if the last digit of the bar
code is unknown or if there are multiple samples on the track that end with this bar
code. All samples that have a bar code beginning with 0999.0999 are listed.
4.
Tap Search or press the Enter key to display a list of search results.
5. If multiple samples are displayed for one bar code, select the sample based on its status.
NOTE: The following actions can cause multiple samples to be displayed for one bar code:
– A bar code containing an asterisk was entered.
– Tubes have been repeatedly removed from and placed back on the GLP systems
Track.
Operating instructions
Track Sample Manager user interface
Section 5
132
GLP systems Track Operations Manual
80003968-101 - 2021-09-16