Use Manual

Product code Displays the product code.
Serial Displays the serial number.
HW version Displays the hardware version.
SW version Displays the software version.
Disciplines tab
Displays the disciplines of a module.
Area Type Displays the area type of the module.
Disciplines Displays the discipline of the module.
Function buttons
Disable Disables the selected module on TSM.
NOTE: Only an Abbott Laboratories representative or an
authorized service representative is permitted to perform this
action, which enables the fill level to be reset (when the
Reset fill level button is selected), the module to be emptied,
or data to be restored (only for Buffer Modules and Archive
II).
NOTE: A module can be disabled only when the queue does
not contain CARs or when no CARs are being routed to the
module and fewer than two switches are located in front of
the module. If these situations are not applicable, the module
status must be changed before the module is disabled on the
TSM.
Enable Enables the selected module on TSM.
Update Refreshes the module controller data on the screen.
Close Closes the screen and returns to the controller overview.
Related information...
Track / RE tab (TSM), page 104
Section 5
Operating instructions
Track Sample Manager user interface
GLP systems Track Operations Manual
80003968-101 - 2021-09-16
113