Use Manual
Table Of Contents
- Table of contents
- Read me first
- Section 1: Use or function
- Section 2: Installation procedures and special requirements
- Section 3: Principles of operation
- Section 4: Performance characteristics and specifications
- Section 5: Operating instructions
- Section 6: Operational precautions and limitations
- Section 7: Hazards
- Section 8: Service, maintenance, and diagnostics
- Section 9: Troubleshooting
- Appendix A: Alinity ci-series SAL
- Design and function
- Technical data
- Sample Access Line operation
- Buttons
- Start screen
- Power on the Sample Access Line
- Place the Sample Access Line online
- Place the Sample Access Line offline
- Pause the Sample Access Line
- Deactivate pause mode
- Restart the Sample Access Line
- Main menu screen element descriptions
- Login screen
- Access the Login screen
- Information screen element descriptions
- Access the Information screen
- Access the Configuration screen
- Error message screen
- Acknowledge an error message
- Acknowledge a message
- Weekly cleaning procedure
- Error messages
- Communication and software update error messages (0-10000)
- Module component error messages (20000-29999)
- Message code: 20105
- Message code: 20200
- Message code: 20201
- Message code: 20202
- Message code: 20203
- Message code: 20204
- Message code: 20205
- Message code: 20206
- Message code: 20207
- Message code: 20209
- Message code: 20210
- Message code: 20211
- Message code: 20901
- Message code: 20902
- Message code: 20910
- Message code: 20911
- Message code: 20912
- Archive error messages (21300-21468)
- Message code: 22501
- Message code: 22502
- Message code: 22550
- Message code: 22600
- Message code: 22601
- Message code: 22602
- Message code: 22603
- Message code: 22604
- Message code: 22605
- Message code: 22606
- Message code: 22607
- Message code: 22608
- Display error messages (23000-23017)
- Message code: 27000
- Error message on the touchscreen user interface
- CAR with sample at AccessPoint, in traffic jam, or in long queue; sample matter has been removed
- Revision history
- Index
Read me first
Foreword
This interface manual is intended for the relevant laboratory staff operating the Sample Access
Line (SAL).
Ensure that this interface manual is read and understood before SAL startup is performed. The
interface manual is supplied as scope of delivery of the product and should be available to the
laboratory staff at all times.
This interface manual contains information on the SAL properties and handling, and instructions
and measures for maintaining its operational readiness.
The GLP systems Track laboratory automation system is a modular, customer-specific design.
This interface manual refers only to the SAL. Ensure that the manuals relating to each single
component are observed. In addition, observe the manuals for the connected analyzers.
For laboratory professional use only.
See the GLP systems Track Operations Manual for the following information:
• System security
• Customer service
• Intended use
• Proprietary statement
• Disclaimers
• GLP systems Track warranty statement for USA customers only
• GLP systems Track agency approvals
• Intellectual property statement
• Key to symbols
• Manufacturer and distributor
• Requirements for handling the specimens
• Safety icons
• Biological hazards
• Precautions
• Spill cleanup
• Requirements for decontamination
• Glossary
Related information...
General safety information, page 6
Sample Access Line (SAL) Interface Manual
80003970-101 DRAFT - 2022-MM-DD
5