Use Manual
Table Of Contents
- Table of contents
- Read me first
- Section 1: Use or function
- Section 2: Installation procedures and special requirements
- Section 3: Principles of operation
- Section 4: Performance characteristics and specifications
- Section 5: Operating instructions
- Section 6: Operational precautions and limitations
- Section 7: Hazards
- Section 8: Service, maintenance, and diagnostics
- Section 9: Troubleshooting
- Appendix A: Alinity ci-series SAL
- Design and function
- Technical data
- Sample Access Line operation
- Buttons
- Start screen
- Power on the Sample Access Line
- Place the Sample Access Line online
- Place the Sample Access Line offline
- Pause the Sample Access Line
- Deactivate pause mode
- Restart the Sample Access Line
- Main menu screen element descriptions
- Login screen
- Access the Login screen
- Information screen element descriptions
- Access the Information screen
- Access the Configuration screen
- Error message screen
- Acknowledge an error message
- Acknowledge a message
- Weekly cleaning procedure
- Error messages
- Communication and software update error messages (0-10000)
- Module component error messages (20000-29999)
- Message code: 20105
- Message code: 20200
- Message code: 20201
- Message code: 20202
- Message code: 20203
- Message code: 20204
- Message code: 20205
- Message code: 20206
- Message code: 20207
- Message code: 20209
- Message code: 20210
- Message code: 20211
- Message code: 20901
- Message code: 20902
- Message code: 20910
- Message code: 20911
- Message code: 20912
- Archive error messages (21300-21468)
- Message code: 22501
- Message code: 22502
- Message code: 22550
- Message code: 22600
- Message code: 22601
- Message code: 22602
- Message code: 22603
- Message code: 22604
- Message code: 22605
- Message code: 22606
- Message code: 22607
- Message code: 22608
- Display error messages (23000-23017)
- Message code: 27000
- Error message on the touchscreen user interface
- CAR with sample at AccessPoint, in traffic jam, or in long queue; sample matter has been removed
- Revision history
- Index
CAR with sample at AccessPoint, in traffic jam, or
in long queue; sample matter has been removed
Probable cause Corrective action
The analysis of the sample in the CAR at the AccessPoint
is not yet completed.
1. Leave the CAR with the sample at the AccessPoint.
2. Compare the sample bar code in the CAR to the bar
code displayed on the touchscreen user interface
of the analyzer.
3. Leave the sample in the CAR until the analysis is
completed.
The analyzer is not ready for operation or is defective. 1. Leave the CAR with the sample at the AccessPoint.
2. Compare the sample bar code in the CAR to the bar
code displayed on the touchscreen user interface
of the analyzer. Verify that the analysis has been
completed for the sample.
3. Resolve the error on the analyzer.
An error occurred at the AccessPoint or Sample Access
Line (SAL).
If all analyses have been completed, perform one of the
following steps:
• Follow any instructions displayed on the
touchscreen user interface.
• Perform one of the following steps to reset the SAL
controller manually:
– Press the Reset push button for 3 seconds.
– If a CAR is not released automatically after a
manual reset is performed, remove the CAR
from the AccessPoint.
If the error continues, contact an Abbott Laboratories
representative or an authorized service representative.
Related information...
Alinity ci-series SAL, page 39
Appendix A
Alinity ci-series SAL
CAR with sample at AccessPoint, in traffic jam, or in long queue; sample
matter has been removed
Sample Access Line (SAL) Interface Manual
80003970-101 DRAFT - 2022-MM-DD
77