Use Manual
Table Of Contents
- Table of contents
- Read me first
- Section 1: Use or function
- Section 2: Installation procedures and special requirements
- Section 3: Principles of operation
- Section 4: Performance characteristics and specifications
- Section 5: Operating instructions
- Section 6: Operational precautions and limitations
- Section 7: Hazards
- Section 8: Service, maintenance, and diagnostics
- Section 9: Troubleshooting
- Appendix A: Alinity ci-series SAL
- Design and function
- Technical data
- Sample Access Line operation
- Buttons
- Start screen
- Power on the Sample Access Line
- Place the Sample Access Line online
- Place the Sample Access Line offline
- Pause the Sample Access Line
- Deactivate pause mode
- Restart the Sample Access Line
- Main menu screen element descriptions
- Login screen
- Access the Login screen
- Information screen element descriptions
- Access the Information screen
- Access the Configuration screen
- Error message screen
- Acknowledge an error message
- Acknowledge a message
- Weekly cleaning procedure
- Error messages
- Communication and software update error messages (0-10000)
- Module component error messages (20000-29999)
- Message code: 20105
- Message code: 20200
- Message code: 20201
- Message code: 20202
- Message code: 20203
- Message code: 20204
- Message code: 20205
- Message code: 20206
- Message code: 20207
- Message code: 20209
- Message code: 20210
- Message code: 20211
- Message code: 20901
- Message code: 20902
- Message code: 20910
- Message code: 20911
- Message code: 20912
- Archive error messages (21300-21468)
- Message code: 22501
- Message code: 22502
- Message code: 22550
- Message code: 22600
- Message code: 22601
- Message code: 22602
- Message code: 22603
- Message code: 22604
- Message code: 22605
- Message code: 22606
- Message code: 22607
- Message code: 22608
- Display error messages (23000-23017)
- Message code: 27000
- Error message on the touchscreen user interface
- CAR with sample at AccessPoint, in traffic jam, or in long queue; sample matter has been removed
- Revision history
- Index
Related information...
Sample Access Line operation, page 46
Pause the Sample Access Line
Prerequisite The Online/Offline button is illuminated steady green.
Required module
status
Online
Perform this procedure to pause the Sample Access Line (SAL).
When the SAL is paused, all processes running in the module stop. However, the connection to
the Track Sample Manager remains intact. CARs are still routed to the module.
1.
On the main menu, tap the Pause button
.
2. Wait for the module to transition to a status of Pause.
The End Pause button is displayed. The signal lamp is illuminated steady yellow. The
module is temporarily paused. The CARs that have already been routed are not redirected.
NOTE: If the module is paused for longer than 5 minutes, the module automatically transitions
to a status of Offline.
Related information...
Sample Access Line operation, page 46
Deactivate pause mode
Prerequisite The Online/Offline button is illuminated steady yellow.
Required module
status
Pause
Perform this procedure to deactivate pause mode on the Sample Access Line (SAL).
When the SAL is paused, all processes running in the module stop. However, the connection to
the Track Sample Manager remains intact. CARs are still routed to the module.
1.
On the main menu, tap the End Pause button .
2. Wait for the module to transition to a status of Online.
The signal lamp is illuminated steady green. The module resumes operation. The Pause button
is displayed.
Related information...
Sample Access Line operation, page 46
Alinity ci-series SAL
Sample Access Line operation
Appendix A
50 Sample Access Line (SAL) Interface Manual
80003970-101 DRAFT - 2022-MM-DD