Technical data

ABB
-Welcome M
Operation
| — 30 —
5.4.5 System settings
(During setting, press “#” to confirm, press “*” to cancel, default system password is
345678):
1. Enter the system setting menu
#* system password #
2. Configurations
(1) Set the device as an Outdoor Station or a Gate Station.
Outdoor Station:
#* system password # =>
Configurations # => Device Type # => Outdoor St. # (Default)
Gate Station:
#* system password # =>
Configurations # => Device Type # => Gate Station #
(2) Set the call mode: make a call by a Physical Address or a Logic Code
Set the call mode by Physical Address:
#* system password # =>
Configurations # => Call mode # => Physical Address #
Menu__________
Configurations-- ∧
Access Control
Contact ∨
Device Type_____
Outdoor St. ● -- ∧
Gate Station
∨
Device Type_____
Outdoor St. ∧
Gate Station ●-
∨
Call Mode_______
Physical Add.● ∧
Logic Add.:
∨