Technical data

888-282-2123 • www.jokabsafetyna.com
ABB JOKAB SAFETY
4:8
Vital Safety
Controllers
Vital is based on a single channel safety
concept where multiple safety sensors
can be connected in series and monitored
with a single safety controller. A dynamic
signal is sent from Vital through all con-
nected sensors, and then returned to Vital
which then evaluates the received signal.
As each safety sensor inverts the signal, it
is possible to detect short circuits or faults
in any of the sensors.
Vital 2 and Vital 3 are designed for use
with ABB Jokab Safety Eden sensors, Tina
com ponents and Spot light grids or similar products.
Vital 2 and Vital 3 are both safety controllers with two
safe input functions and two output groups. The only
difference between the two models being in the
input conguration.
Applications
■ Entire safety system based on
the dynamic safety system
Features
■ Easy installation
■ Flexible
■ Cost effective
■ Display for troubleshooting (Vital 2 and Vital 3)
■ A wide range of safety sensors can
be connected into the circuit
■ Several safe outputs
■ Information output
■ Outputs with time delay (Vital 2 and Vital 3)
Approvals
TÜV Nord (Vital 1)
TÜV Rheinland (Vital 2 and Vital 3)