Technical data

888-282-2123 • www.jokabsafetyna.com
ABB JOKAB SAFETY
4:6
Why should you use the Vital Safety System?
...to be able to connect several safety
components in series—at Category 4
— and supervise them with only one
safety controller!
Vital is the heart of a solution which makes it
possible to install/connect many different types of
safety devices in the same safety circuit and still
achieve PL e according to EN ISO 13849-1.
The Vital module is based upon a dynamic single-
channel concept as opposed to conventional dual-
channel safety relays. Up to 30 dynamic sensors can
be connected directly in the safety circuit and be
supervised by only one Vital module. The Vital there
fore replaces several safety relays. Safety components
with output contacts can be connected to the Vital
via low cost Tina adapters.
The Vital also has automatically or manually super-
vised reset selection, dual safety outputs, and an
information output for reset indication and status
information for PLCs.
...to supervise safety components!
Most safety components on the market can be con-
nected to the Vital module. Dynamic sensors enable
safety PL e to be achieved in a single-channel system.
For example, ABB Jokab Safety´s dynamic non-contact
Eden sensor, Spot light beam and emergency stops
(via Tina adapters) can be used. Even mechanical
switches can be connected to Vital with the aid of
ABB Jokab Safety´s Tina adapters.
...for easy installation and assembly
of a safety system!
Vital is a small electronic safety controller that dynam-
ically supervises a number of safety components.
Vital´s detachable connector blocks simplify the con-
nection, troubleshooting and exchange of modules.
The Vital and other safety components can be con-
nected together using standard cables and with
cables having M12 connections.
Why should you choose Vital?
■ PL e, according to EN ISO 13849-1
dynamic safety circuit
■ Can accommodate long cable lengths
■ Manually supervised or automatic reset
■ Two NO safety outputs
■ Detachable connector blocks
■ LED indication of power supply,
dynamic signal and outputs
■ Information output with two functions
■ Cost-effective cable routing/connections