Technical data

ManualsBrandsABB ManualsOtherTina 7A

888-282-2123 • www.jokabsafetyna.com

ABB JOKAB SAFETY

Cabling

4:38

M12-C01 M12-C02 M12-C03 M12-C04

* * * *

M12-3EM12-3DM12-3BM12-3A

Female Male

Female Male Female Male

* Seen from the cable connection side

’Y’ branch with M12 connection and M12-connection device with screw connectors

Female Female

Male

Female

Male

Female Female

Male Female

Female

See the

Connection Examples

HA3306C, D – pages 5:42, 5:43

HH3300A, D – page 5:48

See the

Connection Examples

HA3306C, D – pages 5:42, 5:43

HH3300D – page 5:48

HH3302D – page 5:49

See the

Connection Examples

HR7000L – page 5:36

HR7000O – page 5:37

See the

Connection Examples

HB0001A, 2A, 4A and 6A

pages 5:51, 5:52, 5:53

Many of ABB Jokab Safety's products are

connected using standard M12 connectors.

This facilitates installation, saving a lot of time,

and also dramatically reducing the risk of

incorrect connection.

We have therefore developed cables with

conductors (5 x 0.34 mm + screening) or

8 conductors (8 x 0.34 mm + screening) which

offer the advantages that we believe a good

cable should have. These are available in any length

and in various standard lengths, with molded straight

or angled male or female connectors. Particularly suitable

cables for the Tina 4A and Tina 8A units are C9 and C13.

They have thicker, 0.75 mm

conductors for the feed line

and 0.5 mm

for the other conductors + screening. Refer

to the component list for the variants that are available.

Note: See product list for applications

Accessories

Advantages

■ Area 0.34 mm

■ Always screened cable

■ The screen is always connected

to negative in male connectors

■ The guide pin in the small

connector is indicated by

a recessed arrow that is easy

to recognize

■ Convenient cable in PVC

■ The cable is also

available in any length