Technical data

888-282-2123 • www.jokabsafetyna.com
ABB JOKAB SAFETY
4:32
Tina 8A
Connection Block
Tina 8A is a connection block with eight 5-pin M12
connections. It is used to connect multiple safety
sensors with M12 contacts via a single cable to a
Vital controller or Pluto PLC. This simplies cable
running and reduces cable costs. Multiple connection
blocks can be connected to a Vital/Pluto. Tina 1A is
used for unused M12 connections.
Application
■ Short circuit monitoring and adaptation
of connection block for up to eight
safety sensors adapted to the dynamic
safety circuit
Features
■ Simplies cable routing
and reduces cable costs
■ Allows branching of up to four safety
sensors to the dynamic safety circuit
Approvals
TÜV Nord
Tina 8A Technical Data
1
2
3
4
5
6
12
13
Shield
Manufacturer
ABB AB/Jokab Safety, Sweden
Ordering information
see page 4:58
Level of safety
IEC/EN 61508-1…7
EN 62061
EN ISO 13849-1
EN 954-1
SIL3
SIL3
PL e, category 4
Category 4
PFH
d
4.50×10
-9
Power supply
Operating voltage
Total current consumption
Time delay t (in/out)
Voltage supply at
normal operation (protection OK)
and 24 VDC supply voltage
24 VDC + +15%, -15%
15 mA (25 mA with max
information summary output)
Information output: Max 10 mA
t < 60 µs
Dynamic input: between
9 and 13 volt (RMS)
Dynamic output: between
9 and 13 volt (RMS)
Information output: ~ 23 VDC
Protection class
IP67
Ambient temperature
Storage: -30…+70°C
Operation: -10…+55°C
Humidity range
35 to 85 %
(with no icing or condensation)
Housing material
Based on polyamide,
Macromelt OM646 (V0)
Connectors
M12 5-pole female (8x)
13-pin connection block
Size
149 × 50 × 43 (L × W × H)
Weight
~140 g
Color
Black
Approved standards
European Machinery Directive
2006/42/EC
EN ISO 12100-1:2003
EN ISO 12100-2:2003
EN 60204-1:2007
EN 954-1:1996
EN ISO 13849-1:2008
EN 62061:2005
Certificates TÜV Nord
5-pin M12
female contact (x8)
+24 VDC
Dynamic input signal
0 VDC
Dynamic output signal
Information
Connection block
1. +24 VDC
2. Dynamic input signal
3. 0 VDC
4. Dynamic output signal
Cable shield
5. Information (contact #1)
6. Information (contact #2)
7. Information (contact #3)
8. Information (contact #4)
9. Information (contact #5)
10. Information (contact #6)
11. Information (contact #7)
12. Information (contact #8)
13. Summarized information
(contact #1-8)