Technical data

888-282-2123 • www.jokabsafetyna.com
ABB JOKAB SAFETY
4:29
Vital 5A Technical Data
Manufacturer
ABB AB/Jokab Safety, Sweden
Ordering information
see page 4:58
Level of safety
IEC/EN 61508-1…7
EN 62061
EN ISO 13849-1
EN 954-1
SIL3
SIL3
PL e, category 4
Category 4
PFH
d
4.50×10
-
9
Power supply
Operating voltage
Current consumption, A1-A2
Bypass connection
Time delay t (in/out)
Voltage supply at normal
operation (protection OK) and 24
VDC supply voltage
24 VDC + +10%, -10%
No bypass: 10 mA
Bypass using a 5 W indication
lamp: 240 mA
Tina 5A can bypass max. 30
Eden/Tina-units or 6 Spot T/R
t < 260 µs
Dynamic input: between
9 and 13 volt (RMS)
Dynamic output: between
9 and 13 volt (RMS)
Information output: ~ 23 VDC
Protection class
Enclosure: IP40
Connection block: IP20
Ambient temperature
-10…+55°C
Humidity range
35 to 85 %
(with no icing or condensation)
Housing material
Based on polyamide, Macromelt
OM646 (V0)
Connectors
Connection blocks with a total of
8 terminals (2 x 4)
Mounting
35 mm DIN rail
Size
120 × 84 × 22.5 mm (L x W x H)
Weight
~135 g
Color
Grey
Connections
+A1: +24 VDC
Y14: Information of bypass
L1-L2: Bypass lamp
(or 820 ohm/2W resistor)
-A2: 0 VDC
S1: Dynamic signal in
S2: Dynamic signal out,
transcoded
S4: Dynamic signal out,
transcoded twice
Approved standards
European Machinery Directive
2006/42/EC
EN ISO 12100-1:2003
EN ISO 12100-2:2003
EN 60204-1:2007
EN 954-1:1996
EN ISO 13849-1:2008
EN 62061:2005
EN 61496-1:2004 + A1:2008
Certificates
TÜV Nord