Technical data

888-282-2123 • www.jokabsafetyna.com
ABB JOKAB SAFETY
4:17
Manufacturer
ABB AB/Jokab Safety, Sweden
Ordering information
see page 4:57
Level of safety
EN ISO 13849-1
EN 62061
IEC/EN 61508-1…7
EN 954-1
PL e, category 4
SIL 3
SIL 3
Category 4
PFH
d
Relay output
Transistor output
2.00×10
-9
1.50×10
-9
Color
Grey
Weight
390 g
Power supply
24 VDC ±15%
Fuse
An external fuse must be
connected in series with the
supply voltage to A1
6 A
Max line resistance
at nominal voltage to X1
150 Ohm
Power consumption
Total current consumption
300 mA
Input function 1
(dynamic safety circuit)
Dynamic output signal
Dynamic input signal
T1
R1 (odd number of
sensors in a circuit)
R2 (even number of
sensors in a circuit)
Input function 2
(dynamic safety circuit)
Dynamic output signal
Dynamic input signal
T11
R11 (odd number of sensors in a
circuit)
R12 (even number of sensors in
a circuit)
Reset input X1/X11
Voltage at X1/X11 when reset
Reset current
Minimum contact closure time
for reset
+24VDC
30 mA (300 mA peak during
contact closure)
80 ms
Number of sensors
Max. number of Eden or Tina
units per input function
Total max. cable length
(depending on the number of
Eden/Tina units)
Max. number of light beams
(Spot T/R) per input function
Spot 10
Spot 35
Total max. cable length
(depending on the number of
Spot T/R)
10
500 m
1
3
100 m
Maximum number of units varies depending on the installation and
cable size. For more information, see the examples in this chapter.
Response time
Relay output (Q1, Q11)
Safe transistor outputs
(Q2, Q12)
Non-safe transistor output
(Q2, Q12)
15 – 24 ms
11 – 20 ms
11 – 20 ms
Relay outputs
Number of outputs
Max. load capacity, res. load
Max. load capacity, ind. load
2 NO
6A/250 VAC
AC-1: 250 V/1.5 A
AC-15: 250 V/1.5 A
DC-1: 50 V/1.5 A
DC-14: 24 V/1.5 A
Safe transistor outputs
Number of outputs
Output voltage (rated)
Output voltage (at load)
Max. load
Short circuit protection
Output – 0V
Output – +24V
2
–24V
> 22V at 800 mA/24V
supply voltage
23,3V at 150 mA/24V
supply voltage
800 mA
Yes
Normal (not guaranteed)
Non-safe transistor output
(information)
Output voltage (rated)
Max. load
+24 VDC
1 A
Mounting
DIN rail
35 mm DIN rail
Operating temperature range
-10°C to + 55°C
Connection blocks (detachable)
Max screw torque
Max connection area:
Solid conductors
Conductor with socket contact
Air and creep distance
1 Nm
1x4 mm
2
/2x1.5 mm
2
/12AWG
1x2.5 mm
2
/2x1 mm
2
4kV/2 DIN VDE 0110
Protection class
Enclosure
Connection blocks
IP 40 IEC 60529
IP 20 IEC 60529
Approved standards
EN ISO 13849-1/EN 954-1
EN ISO 13849-2
EN 62061
EN 61496 -1
EN 574
EN 692
EN 60204-1
EN 50178
EN 61000-6-2
EN 61000-6-4
EN 61000-4-
IEC/EN 61508-1…7
Vital 2 Technical Data
Note:
Connector
blocks are
detachable
without cables
having to be
disconnected.