Technical data

5/29 2TLC172001C0202 | ABB Safety Handbook
5
Adaptation unit
Tina 6A
Description
Tina 6A monitors short circuits. It is used to adapt the safety
sensors with safety contact strips and safety mats with relay
outputs to the dynamic safety circuit. The device is fitted with
a LED for status indication of the dynamic safety circuit.
Technical data – Tina 6A
Article number
2TLA020054R0600
Level of safety
IEC/EN61508-1…7 SIL3
EN62061 SIL3
ENISO13849-1 PLe/Cat.4
PFH
D
4.50 × 10
-9
Power supply
Operating voltage 24 VDC + +15%, -25%
Total current consumption 47 mA (57 mA with max information
output) Information output: Max 10 mA
Current through safety device
contacts 12mA
Short circuit current between
contacts 10mA
Time delay t (in/out) t < 70 µs
Voltage supply at normal opera-
tion (protection OK) and 24 VDC
supply voltage
Dynamic input: between 9 and 13
volt (RMS) Dynamic output: between
9 and 13 volt (RMS)
Information output: ~ 23 VDC
Protection class IP67
Ambient temperature Storage: -30…+70°C
Operation: -10…+55°C
Humidity range 35 to 85 % (with no icing or conden-
sation)
Housing material Based on polyamide, Macromelt
OM646 (V0)
Connectors M12 5-pole male
M12 5-pole female
Size 63 × 31 × 15 (L × W × H)
Weight ~30 g
Colour Black
Approved standards European Machinery Directive
2006/42/EC ENISO12100-1:2003,
ENISO12100-2:2003, EN60204-
1:2007, ENISO13849-1:2008,
EN62061:2005
Certificates TÜV Nord
33
62, 2
3311, 2
M12 M12
LED
× 2
1
2
3
4
5
1
2
3
4
5
5-pin M12 male contact:
1. +24VDC
2. Dynamic input signal
3. 0 VDC
4. Dynamic output signal
Information
5-pin M12 female contact:
1. Safety circuit A1-A2
2. Safety circuit A1-A2
3. Safety circuit B1-B2
4. Safety circuit B1-B2Not used
Approvals:
Application:
– Short circuit monitoring and
adaptation of safety sensors
to the dynamic safety circuit
– For example:
Contact edges
Bumpers
Safety mats
Features:
– Simplifies the system as well
as maintaining the safety level
– Indication of status by LED
TÜV
NORD