Technical data

5/23 2TLC172001C0202 | ABB Safety Handbook
5
Blanking plug for connection block
Tina 1A
Description
Tina 1A is a device that is designed for use with the connec-
tion blocks Tina 4A or Tina 8A where it is used as a blind plug
in unused M12 connections. The device is fitted with a LED
for status indication of the dynamic safety circuit.
Technical data – Tina 1A
Article number 2TLA020054R0000
Level of safety
IEC/EN61508-1…7 SIL3
EN62061 SIL3
ENISO13849-1 PLe/Cat. 4
PFH
D
4.50 × 10
-9
Power supply
Operating voltage 24 VDC + +15%, -25%
Total current consumption 17 mA (27 mA with max information
output)
Information output: Max 10 mA
Time delay t (in/out) t < 60 µs
Voltage supply at normal
operation (protection OK) and 24
VDC supply voltage
Dynamic input: between 9 and 13
volt (RMS)
Dynamic output: between 9 and 13
volt (RMS)
Information output: ~ 23 VDC
Protection class IP67
Ambient temperature Storage: -30…+70°C
Operation: -10…+55°C
Humidity range 35 to 85 % (with no icing or conden-
sation)
Housing material Based on polyamide, Macromelt
OM646 (V0)
Connector M12 5-pole male
Size 48 × 23 × 15 mm (L x W x H)
Weight ~20 g
Colour Black
Approved standards European Machinery Directive
2006/42/EC
ENISO12100-1:2003,
ENISO12100-2:2003,
EN60204-1:2007,
ENISO13849-1:2008,
EN62061:2005
Certificates TÜV Nord
47
32
24, 5
11, 2
LED
1
2
3
4
5
5-pin M12 male contact
1. +24VDC
2. Dynamic input signal
3. 0 VDC
4. Dynamic output signal
5. Not used
Approvals:
Application:
– Is used as a blanking plug in
unused M12 connectors at
connection blocks
Features:
– Indication of status by LED
TÜV
NORD