User guide

UNIT
MEAS URE
NEXT
UNIT
MEAS URE
NEXT
ENTER
ENTER
IONCON
CONFIG
EXIT
ppb
ppm
ENTER
VALENC
MEAS URE
-3
ENTER
END MV
MEAS URE
ENTER
END.MAG
MEAS URE
ENTER
MAGS
MEAS URE
2
100
-300
REF Z
mV
MEASURE
CALIBRATE
OUT/HOLD
CONFIGURE
SECURITY
DISPLAY
SPT/TUNE
MEASURE
CALIBRATE
OUT/HOLD
CONFIGURE
SECURITY
DISPLAY
SPT/TUNE
MEASURE
CALIBRATE
OUT/HOLD
CONFIGURE
SECURITY
DISPLAY
SPT/TUNE
MEASURE
CALIBRATE
OUT/HOLD
CONFIGURE
SECURITY
DISPLAY
SPT/TUNE
MEASURE
CALIBRATE
OUT/HOLD
CONFIGURE
SECURITY
DISPLAY
SPT/TUNE
MEASURE
CALIBRATE
OUT/HOLD
CONFIGURE
SECURITY
DISPLAY
SPT/TUNE
I-E67-84-1B February,2002 8-11
Figure 8-4. Screen Flows For Ion Concentration
Configure State of Operation.
4) Set the MAGS (i.e., magnitudes) by
incrementing or decrementing the
displayed value using and Keys
respectively, and entering the new value
using the ENTER Key.
5) Set the END.MAG (i.e., ending magnitude)
by incrementing or decrementing the
displayed value using and Keys
respectively, and entering the new value
using the ENTER Key.
6) Set the END MV (i.e., ending millivolt)
by using the Key to increment the
blinking digit and the Key to move to
the next digit and pressing the ENTER Key