User guide

I-E67-84-1B February,2002 8-4
See Figure 8-1 for the corresponding screen
flows.
MODIFY CONFIGURE STATES OF OPERATION
Since the View Configure State only displays
the configured options, the following
sections will strictly focus on each Modify
Configure State and the available options for
these states.
The Modify Configure State contains all the
available settings that establishes the
functionality of the TB84PH Advantage Series
analyzer. Upon receipt of the analyzer, the
default configuration (unless otherwise
specified by the customer when ordering the
TB84PH Advantage Series analyzer) will be used
once the analyzer has been powered. See the
Preface or Appendix C for the default
configuration settings.
Before installing the analyzer, the
configuration should be modified to reflect
the final installed application. The Modify
Configure States define the sensor interface,
output parameters, and diagnostic
functionality. Table 8-1 describes each of
these programming modes and their function.