User guide

CONFIG
NEXT
MODIFY
MEASURE SELECT
PASSWD
VIEW
MEASURE
BASIC
MEASURE
ADVNCD
MEASURE
TOPLEV
TOPLEV
SAMPLE
No password
protect for conf ig.
pH
7.02
pH
7.02
pH
7.02
pH
7.02
NOTE: W hen exiting the configuration/modif y environment and one or more conf iguration items have been changed,
a save screen will be shown as illustrated below.
NO
7.02
SAVE?
MEASURE YES
CONFIG
EXIT
MEASURE
MEASURE
Does Not Save
Changes
Saves Changes
pH
SELECT
NEXT
NEXT
NEXT
MEASURE
CALIBRATE
OUT/HOLD
CONFIGURE
SECURITY
DISPLAY
SPT/TUNE
MEASURE
CALIBRATE
OUT/HOLD
CONFIGURE
SECURITY
DISPLAY
SPT/TUNE
MEASURE
CALIBRATE
OUT/HOLD
CONFIGURE
SECURITY
DISPLAY
SPT/TUNE
MEASURE
CALIBRATE
OUT/HOLD
CONFIGURE
SECURITY
DISPLAY
SPT/TUNE
MEASURE
CALIBRATE
OUT/HOLD
CONFIGURE
SECURITY
DISPLAY
SPT/TUNE
No NEXT for BASIC
instruments
ENTER
ENTER
If No Configuration changes
Were Made.
Last Selected
I-E67-84-1B February,2002 8-2
Figure 8-1. Screen Flow Diagram For
Modify/View and Basic/Advanced Configure
States of Operation.
As seen in Figure 8-1, the TB84PH Advantage
Series analyzer queries if the user would like
to Modify the configuration. Pressing the YES
Smart Key moves the user into the Modify
Configure State, pressing the NO Smart Key
moves the user to the View configuration
query, and pressing the Exit To MEASURE Smart
Key escapes to the Measure Mode.
If a configuration requires modification and
the user is in the View Configure State,
access to the Modify Configure State is
provided through a HotKey function. The
HotKey links the View Configure State to the
Modify Configured State using the ENTER Smart
Key. For example, the TMP.SNS (i.e.,
temperature sensor) in the View Configure
State can be modified from PT 100 to None by