User guide

MOUNT
BRACKET
4TB5008-0071
WALL
FASTENERS FOR WALL
(SUPPLIED BY OTHERS)
3/8" X 5/8"
BOLT
4TB4704-0119
(4 TYP)
3/8"
FLATWASHER
4TB4710-0028
(4 TYP)
3/8"
LOCKWASHER
4TB4710-0022
(4 TYP)
INSTRUMENT
I-E67-84-1B February,2002 3-7
Using Figure 3-4 as a reference, mount the
TB84PH analyzer as follows:
1) Select the desired location and orientation
of the TB84PH analyzer.
2) Attach the instrument mount bracket to the
selected location using the appropriate type
of fastener based on the mounting surface
material.
3) Attach the instrument to the instrument
mounting bracket using the supplied 3/8" x
5/8" bolts, 3/8" flat washers, and 3/8" lock
washers.
Figure 3-4. Wall Mount Installation Diagram
Panel Mounting
The TB84PH Panel Mount Kit (p/n 4TB9515-0123)
contains four panel bracket assemblies and a
panel gasket. The TB84PH enclosure conforms
with DIN sizing and requires a 135.4 mm x
135.4 mm cut-out for panel mounting. The
panel brackets accommodate a maximum panel
thickness of 3/8".
Using Figure 3-5 as a reference, mount the
TB84PH analyzer as follows:
1) Select the desired location of the TB84PH
analyzer.