User guide

5/16" U-BOLT
4TB4704-0096
PIPE MOUNT
BRACKET
4TB5008-0022
MOUNT
BRACKET
4TB5008-0071
PIPE
3/8" X 3/4"
BOLT
4TB4704-0086
3/8" X 5/8"
BOLT
4TB4704-0119
(4 TYP)
(2 TYP)
(4 TYP)
5/16"
FLATWASHER
4TB4710-0025
5/16"
LOCKWASHER
4TB4710-0023
(4 TYP)
(4 TYP)
3/8" NUT
4TB4711-0020
(4 TYP)
3/8"
FLATWASHER
4TB4710-0028
(8 TYP)
3/8"
LOCKWASHER
4TB4710-0022
(8 TYP)
INSTRUMENT
I-E67-84-1B February,2002 3-5
Figure 3-2. Pipe Mount Installation Diagram
Hinge Mounting
The TB84PH Hinge Mount Kit (p/n 4TB9515-0125)
contains L- and instrument mounting brackets,
a stainless steel hinge, and associated
hardware. The Hinge Mount Kit allows for a
clear view of the display while maintaining
easy access to the rear of the instrument.
Using Figure 3-3 as a reference, mount the
TB84PH analyzer as follows:
1) Select the desired location and orientation
of the TB84PH analyzer.
2) Attach the L-bracket to the selected
location using the appropriate type of
fastener based on the mounting surface
material.
3) Attach the stainless steel hinge to the L-
bracket using the supplied 3/8" x 3/4" bolts,
3/8" flat washers, 3/8" lock washers, and 3/8"
nuts.
4) Attach the instrument mounting bracket to
the stainless steel hinge using the supplied
3/8" x 3/4" bolts, 3/8" flat washers, 3/8"
lock washers, and 3/8" nuts.
5) Attach the instrument to the instrument