User guide

Property Characteristic/Value
I-E67-84-1B February,2002 1-13
Weight 4.2 lb (1.9 kg) without mounting hardware
7.5 lb (3.4 kg) with Pipe Mounting Hardware
EMC Requirements CE certified:
Electromagnetic Emission - EN50082-1: 1994
EN55011: 1991 (CISPR11: 1990) Class A
Electromagnetic Immunity - EN50082-2: 1996
EN61000-4-2: 1995 6 kV Contact
6 kV Indirect
EN61000-4-3: 1997 10 V/m (unmodulated, rms)
80 to 1000 MHZ
EN61000-4-4: 1995 1 kV Signal Lines
5/50 T /T nS
rh
5 kHz
EN61000-4-8: 1994 50 Hz
30A(rms)/m
ENV50141: 1994 10 V (unmodulated, rms)
0.15 to 80 MHZ
80% AM (1kHz)
150 ohms, source impedance
ENV50204: 1996 10 V/m (unmodulated, rms)
900 ±5 MHZ
50% duty cycle
200 Hz
Low Voltage - EN61010-1:1993 (Category II)
Agency Approvals
1
(pending)
FM Non-incendive.
CSA Class I, Division 2, Groups A, B, C, and D. Class II,
Class I, Division 2, Groups A, B, C, and D. Class II,
Division 2, Groups F and G. Class III, Division 2.
Division 2, Groups E, F and G. Class III, Division 2.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
1. Hazardous location approvals for use in flammable atmospheres are for ambient
conditions of -25 to 40 C (-13 to 104 F), 86 to 108kPa (12.5 to 15.7 psi) with a
ooo o
maximum oxygen concentration of 21%.