User guide

I-E67-84-1B February,2002 B-1
APPENDIX B - PROGRAMMING TEXT STRING GLOSSARY
GENERAL
When programming the TB84PH Advantage Series
analyzer, the six digit, alphanumeric region
will display a wide variety of text prompts.
In many cases, these prompts are abbreviations
or portions of words. This section contains a
complete list of the text prompts and their
full text equivalent.
GLOSSARY OF PROGRAMMING TEXT PROMPTS
Table B-1. Glossary of Text Prompts
TEXT STRING DESCRIPTION
1PT.CAL One Point Calibration
20MA.PT 20 Milliamp Point
2PT.CAL Two Point Calibration
3K.BLCO 3 kohm Balco (Temperature Compensation)
4MA.PT 4 Milliamp Point
REV.A10 Software Revision A10
ADVNCD Advanced (Programming Mode)
ANALZR Analyzer State
ANTMNY Antimony (pH Sensor with Antimony Measurement
Electrode)
ASY.POT Asymmetric Potential
AUT.SOL Automatic Temperature Compensation (Nernstian)
with Solution Coefficient
AUTO Automatic Temperature Compensation (Nernstian)
BAD.CAL Bad Calibration - Entered values caused the
calculated values to exceed maximum values.
BAD.VAL Bad Value - Entered value exceeded maximum
allowable value for the entered parameter.
CALIBR Calibrate Mode
CONFIG Configure Mode
DAMPNG Damping State
DIAGS Diagnostics State