User guide

FRONT BEZEL
KIT
4TB9515-0210 (FM)
REAR COVER
KIT
4TB9515-0214
FOR SIGNAL WIRING
4TB9515-0165
POWER SUPPLY
PCB ASSEMBLY
4TB9515-0207
pH/ORP/pION INPUT
PCB ASSEMBLY KIT
4TB9515-0153
SHELL KIT
4TB9515-0212
MICROPROCESSOR PCB
ASSEMBLY KIT
4TB9515-0199
CARSON CITY, NV.
TAG
FOR TB5 SENSORS
4TB9515-0163
1/2" LIQUID TITE FITTING KIT
1/2" LIQUID TITE FITTING KIT
FOR TBX5 SENSOR WITH TC
PG9 LIQUID TITE FITTING KIT 4TB9515-0191
4TB9515-0208 (STD)
I-E67-84-1B February,2002 16-3
5. Install the Rear Cover and Front Bezel
Assemblies and tighten the eight captive
screws.
REAR COVER ASSEMBLY REMOVAL/REPLACEMENT
1. Turn off power to the analyzer. Allow at
least 1 minute for the analyzer to discharge.
2. Remove the Rear Cover Assembly by
unscrewing the four captive screws.
3. Replace with the new Rear Cover Assembly.
4. Tighten the four captive screws.
Figure 16-1. TB84PH Advantage Series Exploded View Showing Kit
Assignments.