User guide

I-E67-84-1B February,2002 13-6
Additional Diagnostic Messages
Other diagnostic messages may appear during
analyzer programming. These messages include
BAD.VAL (i.e., bad value) and DENIED.
BAD.VAL indicates the attempted numeric entry
of a value which is out of the allowed
analyzer range. See Table 1-3,
Specifications, for analyzer range limits.
DENIED indicates incorrect entry of a security
password. See Section 9, Security Mode, for
information on the Security Mode of Operation.
RAM.ERR indicates a Random Access Memory
read/write error. The analyzer will
automatically reset when this error has been
encountered. If the analyzer continues to
reset, contact ABB for problem resolution.