User guide

I-E67-84-1B February,2002 1-6
Operating Procedures
This section addresses the operator interface
controls and their function. The Mode of
Operation and LCD status icons are listed and
their functions are described.
Measure Mode
This section describes the normal analyzer
mode of operation which includes the primary
and secondary display, Fault Information Smart
Key, and Menu Smart Key functions.
Calibrate Mode
This section provides sensor and analyzer
calibration procedures and calibration data
descriptions.
Output/Hold Mode
This section describes the Output/Hold States
of Operation including hold, rerange, damping,
and spike features.
Configure Mode
This section defines the required actions to
establish and program the analyzer
configuration.
Security Mode
This section provides the procedures necessary
to set and clear analyzer security codes.
Secondary Display
Mode
This section provides the procedure necessary
to set the information displayed in secondary
display of the Measure Mode.
Utility Mode
This section defines the reset options and
Basic/Advanced programming toggle.
Diagnostics
This section provides a description of the
diagnostic tools available to aid with
analyzer servicing. This section also
provides a listing of displayed faults and the
corrective action to be taken.
Troubleshooting
This section provides an analyzer and sensor
troubleshooting guide to help determine and
isolate problems.
Sensor Maintenance
This section provides cleaning procedures for
pH/ORP/pION sensors.
Repair/Replacement
This section includes procedures for analyzer
assembly and sensor replacement.
Support Services
This section provides a list of replacement
parts unique to the TB84PH Advantage Series
analyzer.
Appendix A
This section provides temperature compensation
information.