User guide

SETPT1
10.0
ENTER
HI SPT
MEASURE
CONFIG
EXIT
RELAY1
RETURN
ENTER
DBAND
MEASURE
0.0
ENTER
DLY.MIN
MEASURE
MEASURE
CALIBRATE
OUT/HOLD
CONFIGURE
SECURITY
DISPLAY
SPT/TUNE
MEASURE
CALIBRATE
OUT/HOLD
CONFIGURE
SECURITY
DISPLAY
SPT/TUNE
MEASURE
CALIBRATE
OUT/HOLD
CONFIGURE
SECURITY
DISPLAY
SPT/TUNE
Display "HI" or "LO",
as configured.
pH
0.50
pH
*
* 99.9 minutes is the
maximum allowable time
limit.
Display units and PV as configured.
I-E67-84-1B February,2002 11-3
Figure 8-11. Screen Flow Diagram For Setting
the Setpoint Relay Output Configure State of
Operation.
Diagnostic Relay Output (Basic/Advanced)
A Diagnostic Relay Output simply energizes
when a diagnostic condition has been detected.
The relay can be configured to trigger on a
sensor, instrument, or all diagnostic
conditions.