User guide

I-E67-84-1B February,2002 1-5
Secure Operation
A hardware lockout feature prevents
unauthorized altering of instrument
configuration parameters while allowing other
analyzer functions to be fully accessible.
Software security codes can also be assigned
to the Configure, Calibrate, Output/Hold, and
Setpoint/Tune Modes of Operation.
Compact Packaging
Industry standard ½-DIN size maintains
standard panel cut outs and increases
installation flexibility by providing pipe,
wall, hinge, and panel mounting options.
Nonvolatile Memory
In the event of a power failure, the
nonvolatile memory stores and retains the
configuration and calibration data.
Analyzer Diagnostics
Built-in electronic circuitry and firmware
routines perform a series of self-diagnostics,
monitoring such areas as memory and input
circuit integrity. Irregularities are
indicated for maintenance purposes.
EQUIPMENT APPLICATION
The TB84PH Advantage Series analyzer can be
used anywhere pH, ORP, or specific ion
measurements are desired.
INSTRUCTION CONTENT
Introduction
This section provides a product overview, a
description of each section contained in this
manual, and how each section should be used.
This section also has a glossary of terms and
abbreviations, a list of reference documents
on related equipment and/or subjects, the
product identification (nomenclature), and a
comprehensive list of hardware performance
specifications including accessories and
applicable certification information.
Analyzer
Functionality And
Operator Interface
Controls
This section provides a short description on
the functionality of the TB84PH Advantage
Series analyzer.
Installation
This section provides information on analyzer
installation such as unpacking directions,
location considerations, analyzer mounting
options and procedures, wiring instructions,
sensor connections, and grounding procedures.