User manual

Klinkmann Automation SPA Bus Server 7
SPA Server Ver 1.x User Manual Rev 2.3 120XXM23
Licensing by using HASP HL key
The following should be done to enable the licensing by HASP HL key:
- The “HASP Device driver” and “HASP Files” are selected during the SPA Bus
Server installation in “Custom Setup” dialog – that causes correspondingly
haspdinst.exe and hasp_windows_4442.dll files are copied to SPA Bus Server
folder and Sentinel LDK Run-time Environment (HASP HL Runtime Package) is
installed and started, enabling the SPA Bus Server can detect the HASP HL USB
dongle;
- insert the received HASP key into USB port, and wait until “Installing device driver
software” message disappears and “Device driver software installed successfully”
message appears;
- start SPA Bus Server and check - if “Sofware key or HASP HL key not found!”
message does not appear then it means everything is done correctly and SPA Bus
Server runs in full mode with licensing by HASP HL key enabled.
Software license key
SPA Bus Server supports the “computer dependent” software licensing. The following
steps are required to enable it:
1) Start SPA Bus Server, click on "Help" menu item (also short-cut Alt+H can be used)
and pop-up menu with "Help" menu commands will appear:
Select “License” and “License” dialog will appear:
2) Here the “Customer PC Code” is “computer-dependent” string generated by SPA Bus
Server and it is unique for this computer. Write it down or Copy/Paste to e-mail when
ordering the SPA Bus Server.
3) After purchasing the SPA Bus Server, you will get the software license key - 16-
character alphanumeric string. Open the “License” dialog again and Copy/Paste it to
“Software Key” field: