User manual

Klinkmann Automation SPA Bus Server 14
SPA Server Ver 1.x User Manual Rev 2.3 120XXM23
Parity
The selected Parity must match the setting used in the SPA bus.
Note. The default setting is Even parity.
Data Bits
The selected Data Bits must match the setting used in the SPA bus.
Note. The default setting is 7 Data Bits.
Echo
This field must be checked if echo comes back to the port. The echo can be generated by
some RS-232/RS-485 converters or by the SACO 100M device.
Note. The default setting is no echo.
Time and Date sending
These fields are used to enable or disable Date and/or Time transfers to all SPA bus
devices and to enter the intervals between Date/Time transfers. Date/Time transfer
should not be enabled if the SACO 100M device is connected to this port.
Note. The default settings are 60 seconds for Date and Time transfers and 10 seconds
for Time transfer.
When all entries have been made, click on Done to process the configuration for the
communication port.
Saving SPA Configuration File
If the configuration file does not currently exist, or a new configuration path has been
specified, the Server will display the "Save Configuration" dialogue box:
This dialogue box displays the path where the Server is going to save the current
configuration file. The path may be changed if necessary. Also, the path can optionally be
recorded in the WIN.INI file by selecting the Make this the default configuration file
option. Doing so it will allow the SPA Server to find the configuration file automatically
each time it is started.