User manual

Klinkmann Automation SPA Bus Server 8
SPA Server Ver 1.x User Manual Rev 2.3 120XXM23
4) Click OK and restart SPA Bus Server. SPA Bus Server software license now is
enabled.
Note – the “Software Key” string is saved to MS Windows system directory (e.g.
C:\Windows) WIN.INI file [SPA] section to enable it is automatically detected at SPA Bus
Server next start-up.
Transferring the software license to other computer
The transfer of Software License Key might be needed in very rare situations when it is
necessary to move Klinkmann software to other computer (or operation system change is
planned for same computer). Such transfer PERMANENTLY removes the Software
License Key, so be very careful when deciding to use this option.
The following steps are required to transfer the Software License Key:
1) Start the SPA Bus Server. For SPA Bus Server “Suite Link & DDE” version, the
ArchestrA SMC Log Viewer (or Wonderware Logger) must be started. For SPA
Bus Server “OPC & DDE” version, the SPA Internal Logger and “Log to File”
should be enabled (see “Troubleshooting menu” and “Internal Logger”sections at
the end of this manual). Select Help/License from main menu and click the
“Transfer” button on “License” dialog:
2) Confirm the transfer of Software License Key by clicking on Yes button:
The “License” dialog now will contain the empty “Customer PC Code” and
“Software Key” fields: