Product specifications

SPlus Operations P13 Connectivity Guide S+ P13 OBJECT REFERENCE
86 2VAA001153C
Additional
Indicators
Object Symbol
6.4.6 Button Area
The button area provides the button to send commands to an object; Issue a command needs a two-step operation.
First, the command selection button for the desired command has to be pressed. To send the command to the object,
the OK/Return button has to be pressed.
Figure 6-3: Faceplate Command Area
6.4.7 Selector Area

Figure 6-4: Faceplate Selector Area
6.5 Display Elements
6.5.1 General
Display elements represent objects within graphics. The set of different display elements provided depends on the
object type. Display elements for control objects have a layout as shown in the following figure.
Figure 6-5: Layout of Display Elements for Control Objects
Table 6-2: State of Additional Indicators
State of Additional Indicators
Indication
Right
Operator Note exist for this object
Normal Faceplate
Extended Faceplate
Command Selection
Command Output