Product specifications

SPlus Operations P13 Connectivity Guide S+ P13 ENGINEERING WORK BOOK
76 2VAA001153C
4.7 ID-Signals Sheet
ID-Signals are only used by the Procontrol P13 Connect OPC server for command output. ID-Signals are not loaded to
S+ Operations. The fields are described in the following table.
Table 4-6: S+ P13 Engineering Workbook- Fields for ID-Signals
OPC Field
Meaning
Value
Type
Tag type
DO
Name
Tag name
String
Descr
Tag description
String
Bus
Bus number

Station
Station number
Hex, 00,..,3F
Device
Device Number
Hex, 00,..,FF
Bit
Bit Number

Section
Section

Text1
Text for 1-state
Text
Text0
Text for 0-state
Text
Priority
Priority for alarm

EventDef
Event definition:
0: No message
1: Message if Normal->Active
2: Message if Active->Normal
3: Message both directions

NormPos
Which is normal (not active) state
{0,1}
Inverted
Field value to be inverted
{Y, N}
Output
Output the value
{Y, N}
4.8 Special Objects Sheet
The following special objects are configured in this sheet:
Table 4-7: S+ P13 Engineering Workbook –Special Objects Sheet
Special Object Type
Object Name
Meaning
required
P13CON
P13 Connectivity
Serves in S+ Operations as target
object for P13 system messages.
yes
Bus
Bus <Bus Number>
e.g. : Bus 5
37
Provides data items for bus status.
optional
Station
<BusAddr>-
STN<StationAddr>
e.g. : 5-STN3E
38
Provides data items for station status.
39
optional
The fields are described in the following table.
Table 4-8: S+ P13 Engineering Workbook- Fields for Special Objects
Field
Object Type
P13CON
BUS
STATION
NAME
e.g.
P13 Connectivity
e.g.
BUS 5
e.g.
5-STN3E
DESC
Procontrol P13 Connectivity
Server
Bus 5
Station 3E on Bus 5
37
Name must follow this pattern.
38
Name must follow this pattern.
39
Station monitoring must be available in the Plant and configured correctly in the OPC server.