Product specifications

SPlus Operations P13 Connectivity Guide PROCONTROL P13 OPC SERVER
2VAA001153C 29
3.3.2.7 ISA PIF Port Configuration
A PIF port must be associated to a PIF coupled bus. The corresponding parameters can be specified in the
corresponding property sheet.
Figure 3-21: Property Page for ISA PIF Port Configuration
Table 3-5: ISA PIF Port Configuration Parameters
Name
Meaning
Allowed Values
Interrupt Level
Interrupt line used by this PIF, i.e. must correspond to
setting of jumper W5 on the PIF hardware.
String, e.g. COM1, COM2, etc.
Channel
I/O address range used by this PIF, i.e. must correspond
to setting of switch S1 on the PIF hardware.
0,1,..,F
Interrupt Enabled
Defines if communication with PIF FIFO should be based
on interrupt mechanism. To disable the interrupt can
avoid problems with no free IRQs
It is recommended not to enable PIF
interrupt