Product specifications

SPlus Operations P13 Connectivity Guide PROCONTROL P13 OPC SERVER
2VAA001153C 25
Figure 3-15: Property Page for PV Engineering File Configuration
3.3.2.3 VPC Modes Configuration
               ands via a

The VPC mode to be used can be selected on the corresponding VPC mode property sheet. It should be kept in mind,
that the PV engineering data to be supplied is also dependant from the VPC mode. The other two modes are options for
special applications.
Figure 3-16: Property Page for VPC Mode Configuration
3.3.2.4 Bus Configuration
The bus configuration determines which bus connections the PServer is using. A bus connection can be either a
connection to a local station via BK06 or to an intraplant bus via PIF board. To a bus connection, a port of a
corresponding type must be associated. A BK06 coupling must be associated to a serial port, a PIF connection must be
associated to a PIF port.